Visual, Visuality, Visual Management, Visual Factory (ITA-ENG)

Le 5S: Non un fine, ma un mezzo

Le 5S: Non un fine, ma un mezzo

Quando parlo delle 5S, spesso mi capita di vedere le persone pensare che si tratti di un fine in sé. Non è così. Le 5S sono uno strumento, un mezzo per raggiungere obiettivi più grandi: sicurezza, efficienza, qualità e riduzione dei guasti. Dobbiamo sempre ricordare questo quando le applichiamo.

Mi è capitato di seguire un’azienda dove il concetto di 5S era stato introdotto solo a parole. I dipendenti sapevano a memoria i cinque termini, ma nessuno ne aveva compreso il vero scopo. “A cosa serve mettere in ordine se domani sarà di nuovo tutto incasinato?” mi chiese un operaio di nome Mario. Gli ho risposto: “Serve a non inciampare oggi e a non perdere tempo domani. Serve a te, non solo all’azienda.”

La sicurezza inizia dall’ordine

Se c’è una cosa che ho imparato sul campo, è che sicurezza e ordine vanno di pari passo. Vi faccio un esempio pratico: Mario, lo stesso operaio, una mattina si è trovato con un macchinario bloccato. Il problema? Trucioli e polvere accumulati in un punto critico. “Non ho avuto tempo di pulire”, mi disse. Ma quello che Mario non aveva capito è che il tempo per pulire lo avrebbe salvato da un fermo macchina e da un rischio di infortunio.

Anche Maria, che si occupava delle pulizie, aveva un metodo poco efficace. Puliva a fondo solo una volta ogni sei mesi, ma nel frattempo lo sporco si accumulava in punti pericolosi. Quando le ho chiesto perché non facesse manutenzione regolare, mi ha risposto: “Non ne vedo l’urgenza.” Le ho detto: “Non c’è sicurezza senza costanza. Non aspettare che accada un incidente per agire.”

Le 5S ci insegnano che prevenire è sempre meglio che correre ai ripari. Quando l’ambiente è ordinato e pulito, gli incidenti si riducono. Pensateci: ogni volta che mettete a posto uno strumento o ripulite un pavimento scivoloso, state proteggendo voi stessi e i vostri colleghi. Non è solo una questione di norme, è una questione di rispetto per la vita.

Efficienza: Piccoli gesti, grandi risultati

Un bravo artigiano si prende cura dei suoi strumenti, così come un bravo chef affila sempre i suoi coltelli. Lo stesso vale per noi. Vi racconto una storia che mi ha colpito: in una fabbrica che seguo, un team ha iniziato a dedicare tre minuti al giorno alle 5S. All’inizio erano scettici: “Tre minuti? Cosa possiamo fare in così poco tempo?” Eppure, in poche settimane, quei tre minuti hanno trasformato il reparto. Gli attrezzi erano sempre al loro posto, le perdite di olio individuate subito, e i percorsi resi più fluidi.

Un altro esempio riguarda un magazzino dove lavorava Luca, un responsabile abituato a passare ore cercando strumenti e materiali. Dopo aver implementato le 5S, Luca mi disse: “Davide, è incredibile. Ora riesco a fare il doppio del lavoro nello stesso tempo. Non perdo più minuti preziosi.” Gli ho risposto: “Non hai guadagnato solo tempo, ma anche tranquillità. Sai sempre dove mettere le mani.”

Qualità: I dettagli fanno la differenza

Ho visto aziende perdere clienti per errori apparentemente insignificanti: una limatura non tolta, una sbavatura lasciata sul pezzo, un’etichetta mancante. È successo a Giulia, responsabile di un reparto di assemblaggio. “Non pensavo che un dettaglio così piccolo potesse avere un impatto così grande,” mi disse. Eppure, un granello di polvere in un componente elettronico ha portato a un’intera partita di pezzi difettosi.

Le 5S ci ricordano che la qualità parte dai dettagli. Ogni volta che ci prendiamo cura del nostro ambiente di lavoro, riduciamo la possibilità di errori. “Un prodotto di qualità nasce in un ambiente di qualità,” ho detto spesso nei miei corsi, e non smetterò mai di ripeterlo.

Ridurre i guasti: La sindrome del lunedì mattina

Chi lavora in produzione sa bene di cosa parlo: il lunedì mattina spesso si trovano macchinari bloccati, scarichi intasati, e problemi che sembrano spuntare dal nulla. In un’azienda che seguo, questo era un problema cronico. Poi, abbiamo introdotto una regola semplice: ogni venerdì pomeriggio, dedicare mezz’ora alla manutenzione preventiva. Il risultato? La “sindrome del lunedì mattina” è sparita. Le 5S non sono un fine ma un mezzo.

Ricordo Andrea, un tecnico che inizialmente era contrario. “Perché devo perdere tempo il venerdì per sistemare cose che posso fare lunedì?” mi chiese. Gli ho risposto: “Andrea, il tempo che perdi oggi lo risparmi domani.” Dopo qualche settimana, Andrea mi ha confessato che il suo lavoro era diventato molto meno stressante.

Conclusione: Un ambiente migliore per tutti

Le 5S non sono solo una metodologia, sono un’opportunità. Ogni volta che mettiamo in ordine, puliamo o organizziamo, stiamo investendo nel nostro futuro. Non pensate alle 5S come un obbligo, ma come uno strumento per migliorare la qualità della vostra vita lavorativa.

Ricordate: ogni passo conta. Anche i piccoli gesti quotidiani possono portare a grandi risultati. “Un ambiente di lavoro migliore crea persone migliori,” ed è questo il vero obiettivo delle 5S.

Per questo Le 5S Non sono un fine, ma un mezzo

—————–

5S: Not an End, but a Means

When I talk about the 5S methodology, I often see people thinking of it as an end goal. But that’s not the case. The 5S system is a tool, a means to achieve greater objectives: safety, efficiency, quality, and reduced downtime. We must always remember this when implementing it.

I once worked with a company where the concept of 5S had been introduced only superficially. The employees could recite the five terms by heart, but no one truly understood their purpose. “What’s the point of tidying up if it’s going to be messy again tomorrow?” asked an operator named Mario. I replied, “It’s about not tripping today and saving time tomorrow. It’s for you, not just the company.”

Safety Begins with Order

One thing I’ve learned in the field is that safety and order go hand in hand. Let me give you a practical example: Mario, the same operator, found his machine jammed one morning. The issue? Chips and dust had accumulated in a critical spot. “I didn’t have time to clean it,” he told me. But what Mario didn’t realize was that taking the time to clean could have prevented the machine stoppage and a potential safety risk.

Then there was Maria, who was in charge of cleaning but had a less-than-effective method. She did deep cleaning only once every six months, allowing dirt to build up in dangerous areas. When I asked her why she didn’t do regular maintenance, she replied, “I don’t see the urgency.” I told her, “There’s no safety without consistency. Don’t wait for an accident to take action.”

The 5S system teaches us that prevention is always better than cure. When the environment is tidy and clean, accidents are reduced. Think about it: every time you put a tool back in its place or clean up a slippery floor, you’re protecting yourself and your colleagues. It’s not just about following rules—it’s about respecting life.

Efficiency: Small Actions, Big Results

A good craftsman takes care of their tools, just as a great chef always sharpens their knives. The same principle applies to us. Here’s a story that struck me: in a factory I worked with, a team started dedicating just three minutes a day to 5S. At first, they were skeptical. “Three minutes? What can we accomplish in such a short time?” Yet, within a few weeks, those three minutes transformed their department. Tools were always in their proper place, oil leaks were identified immediately, and workflows became smoother.

Another example comes from a warehouse where Luca, a manager, used to spend hours looking for tools and materials. After implementing 5S, Luca told me, “Davide, it’s incredible. Now I get twice as much done in the same amount of time. I don’t waste precious minutes anymore.” I replied, “You haven’t just saved time—you’ve gained peace of mind. You always know where to find what you need.”

Quality: The Details Make the Difference

I’ve seen companies lose clients over seemingly minor errors: a shaving not removed, a burr left on a piece, or a missing label. This happened to Giulia, who managed an assembly department. “I didn’t think such a small detail could have such a big impact,” she told me. Yet a speck of dust on an electronic component led to an entire batch of defective products.

The 5S methodology reminds us that quality starts with the details. Every time we take care of our work environment, we reduce the chances of errors. “A quality product comes from a quality environment,” I often say in my training sessions, and I’ll never stop repeating it.

Reducing Breakdowns: The Monday Morning Syndrome

Anyone who works in production knows what I mean: Monday mornings often come with jammed machines, clogged drains, and problems that seem to appear out of nowhere. In a company I worked with, this was a chronic issue. Then, we introduced a simple rule: every Friday afternoon, spend 30 minutes on preventive maintenance. The result? The “Monday Morning Syndrome” disappeared.

I remember Andrea, a technician who was initially against the idea. “Why should I waste time on Friday fixing things I can do on Monday?” he asked. I replied, “Andrea, the time you spend today will save you time tomorrow.” After a few weeks, Andrea admitted his job had become much less stressful.

Conclusion: A Better Environment for Everyone

The 5S system is not just a methodology; it’s an opportunity. Every time we organize, clean, or tidy up, we’re investing in our future. Don’t think of 5S as an obligation but as a tool to improve the quality of your work life.

Remember: every step counts. Even small daily actions can lead to big results. “A better work environment creates better people,” and that is the true goal of the 5S methodology.


Segui il mio blog

Tutti i miei libri su Amazon

Segui il mio sito DavideLega.com per i miei articoli sulla storia logistica, sulla tecnica 5S e Visual e per i racconti di ciò che faccio come docente e consulente in ambito logistico

Seguimi anche sul canale Youtube GazzettaLogistica

Follow My Blog

Buy my Books on Amazon!

Visit DavideLega.com for articles on logistical history, the 5S and Visual techniques, and insights into my work as a lecturer and consultant in the logistics field.

Also, follow me on YouTube at Gazzetta Logistica!

Rispondi